Strider
SR1-O
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | Medium |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Ballistic: 0 Energy: 0 Missile: 0 Support: 0 Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 111 Max Stability: 48 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 30 Alpha: 33 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Single Heat Sinks (Fixed) |
E-Cooling | None |
Gyro | OmniMech (Fixed) |
Structure | Endo-Steel (Fixed) |
Armor | Standard |
Head | FCS Artemis IV S Laser |
Center Torso | Beagle Probe |
Right Torso | CASE Ammo SRM ArtIV Ammo SRM ArtIV |
Left Arm | SRM6 |
Right Arm | SRM6 |
Left Leg | Heat Sink (Fixed) |
Right Leg | None |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. The Primary configuration of the Strider is configured to be a short-range striker. The primary weapons are a pair of SRM-6 launchers that are linked to an Artemis IV system. Backing this up is a single Small Laser. The Strider also carries a Beagle Active Probe in this configuration.
Bonuses
Mech Quirk: OmniMech
Fast Refits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
The SR1-O can be found with these forces:
- Draconis Combine (Kurita)
- Federated Suns (Davion)
- Free Worlds League (Marik)
- Lyran Commonwealth (Steiner)
- Mercenaries
SR1-O-A
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | Medium |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Ballistic: 0 Energy: 0 Missile: 0 Support: 0 Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 17 Max Stability: 0 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 30 Alpha: 11 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Single Heat Sinks (Fixed) |
E-Cooling | None |
Gyro | OmniMech (Fixed) |
Structure | Endo-Steel (Fixed) |
Armor | Standard |
Head | S Laser |
Center Torso | Beagle Probe |
Right Torso | CASE Ammo NARC Haywire Ammo NARC Haywire C3 Slave |
Left Arm | NARC Launcher |
Right Arm | NARC Launcher |
Left Leg | Heat Sink (Fixed) |
Right Leg | None |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. The Strider A carries two Narc missile beacons to designate targets for fire from allied units. Assisting in this mission as well is a TAG laser designator. It mounts a Beagle Active Probe to allow it to find hidden units and a C3 Slave unit to let allied units use the Strider's targeting data. The only true weapon carried on the A configuration is a single Small Laser.
Bonuses
Mech Quirk: OmniMech
Fast Refits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
The SR1-O-A can be found with these forces:
- Draconis Combine (Kurita)
- Federated Suns (Davion)
- Free Worlds League (Marik)
- Lyran Commonwealth (Steiner)
- Mercenaries
SR1-O-B
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | Medium |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Ballistic: 0 Energy: 0 Missile: 0 Support: 0 Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 80 Max Stability: 20 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 30 Alpha: 24 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Single Heat Sinks (Fixed) |
E-Cooling | None |
Gyro | OmniMech (Fixed) |
Structure | Endo-Steel (Fixed) |
Armor | Standard |
Head | None |
Center Torso | None |
Right Torso | CASE Ammo LRM |
Left Arm | LRM10 |
Right Arm | LRM10 |
Left Leg | Heat Sink (Fixed) |
Right Leg | None |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. Intended for long range combat and fire support, the Strider B carries a simple payload of two LRM-10 racks with one ton of ammunition for each.
Bonuses
Mech Quirk: OmniMech
Fast Refits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
The SR1-O-B can be found with these forces:
- Draconis Combine (Kurita)
- Federated Suns (Davion)
- Free Worlds League (Marik)
- Lyran Commonwealth (Steiner)
- Mercenaries
SR1-O-C
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | Medium |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Ballistic: 0 Energy: 0 Missile: 0 Support: 0 Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 80 Max Stability: 10 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 30 Alpha: 30 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Single Heat Sinks (Fixed) |
E-Cooling | None |
Gyro | OmniMech (Fixed) |
Structure | Endo-Steel (Fixed) |
Armor | Standard |
Head | C3 Slave |
Center Torso | L Laser |
Right Torso | CASE Ammo LRM |
Left Arm | LRM5 |
Right Arm | LRM5 |
Left Leg | Heat Sink (Fixed) |
Right Leg | None |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. Another long range orientated configuration, the Strider C carries a pair LRM-5 launchers as its primary weapons . The Strider C also carries a Large Laser for direct fire at long ranges. Finally, the C configuration is built with a C3 Slave unit to allow allied units to use its targeting data.
Bonuses
Mech Quirk: OmniMech
Fast Refits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
The SR1-O-C can be found with these forces:
- Draconis Combine (Kurita)
- Federated Suns (Davion)
- Free Worlds League (Marik)
- Lyran Commonwealth (Steiner)
- Mercenaries
SR1-O-D
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | Medium |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Ballistic: 0 Energy: 0 Missile: 0 Support: 0 Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 101 Max Stability: 16 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 30 Alpha: 39 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Single Heat Sinks (Fixed) |
E-Cooling | None |
Gyro | OmniMech (Fixed) |
Structure | Endo-Steel (Fixed) |
Armor | Standard |
Head | S Laser |
Center Torso | Beagle Probe |
Right Torso | CASE Ammo Streak SRM |
Left Arm | Streak SRM2 M Pulse |
Right Arm | Streak SRM2 M Pulse |
Left Leg | Heat Sink (Fixed) |
Right Leg | None |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. Meant for close combat, the Strider D carries a pair of Streak SRM-2 launchers as its primary weaponry. These are backed up by a pair of Medium Pulse Lasers and a single Small Laser. The D configuration also carries a Beagle Active Probe to allow it to find hidden units, a TAG laser designator, and a C3 Slave unit to share targeting data with allied units.
Bonuses
Mech Quirk: OmniMech
Fast Refits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
The SR1-O-D can be found with these forces:
- Draconis Combine (Kurita)
- Federated Suns (Davion)
- Free Worlds League (Marik)
- Lyran Commonwealth (Steiner)
- Mercenaries
SR1-O-E
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | Medium |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Ballistic: 0 Energy: 0 Missile: 0 Support: 0 Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 116 Max Stability: 48 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 30 Alpha: 34 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Single Heat Sinks (Fixed) |
E-Cooling | None |
Gyro | OmniMech (Fixed) |
Structure | Endo-Steel (Fixed) |
Armor | Standard |
Head | M Laser |
Center Torso | None |
Right Torso | CASE Ammo Streak SRM |
Left Arm | Streak SRM6 |
Right Arm | Streak SRM6 |
Left Leg | Heat Sink (Fixed) |
Right Leg | None |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. A recent addition to the Strider's alternate configurations, the E carries a pair of highly accurate Streak SRM-6 launchers and a single Medium Laser.
Bonuses
Mech Quirk: OmniMech
Fast Refits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
The SR1-O-E can be found with these forces:
- Draconis Combine (Kurita)
- Federated Suns (Davion)
- Free Worlds League (Marik)
- Lyran Commonwealth (Steiner)
- Mercenaries
SR1-O-F
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | Medium |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Ballistic: 0 Energy: 0 Missile: 0 Support: 0 Omni: 5 |
Speed | 7/10/7 |
Firepower | Max Damage: 104 Max Stability: 32 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 30 Alpha: 38 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Single Heat Sinks (Fixed) |
E-Cooling | None |
Gyro | OmniMech (Fixed) |
Structure | Endo-Steel (Fixed) |
Armor | Standard |
Head | None |
Center Torso | None |
Right Torso | CASE Ammo Streak SRM Streak SRM4 Jump Jet (S) Jump Jet (S) Jump Jet (S) |
Right Arm | M Laser |
Left Leg | Heat Sink (Fixed) |
Right Leg | None |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. The F configuration of the Strider is intended for close range combat but unlike the Strider E it is not as dependent on ammunition based weapons. The primary weapons are a pair of Streak SRM-4 launchers backed up by two Medium Lasers. The 'Mech has also had six jump jets added.
Bonuses
Mech Quirk: OmniMech
Fast Refits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
The SR1-O-F can be found with these forces:
- Draconis Combine (Kurita)
- Federated Suns (Davion)
- Free Worlds League (Marik)
- Lyran Commonwealth (Steiner)
- Mercenaries
SR1-O-R
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | Medium |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Ballistic: 0 Energy: 0 Missile: 0 Support: 0 Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 178 Max Stability: 36 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 30 Alpha: 70 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Single Heat Sinks (Fixed) |
E-Cooling | None |
Gyro | OmniMech (Fixed) |
Structure | Endo-Steel (Fixed) |
Armor | Standard |
Head | M Pulse (C) |
Center Torso | M Pulse (C) |
Right Torso | CASE Ammo Streak SRM |
Left Arm | Streak SRM6 (C) |
Right Arm | Streak SRM6 (C) |
Left Leg | Heat Sink (Fixed) |
Right Leg | None |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. A field upgrade developed in the midst of Operation Bulldog, this configuration utilized captured Clan Smoke Jaguar weapons to help bolster the SLDF forces in later waves. Based off the Strider E, thanks to lighter Clan weaponry it is able to mount two Clan-tech Streak SRM-6 launchers and a pair of Clan Medium Pulse Lasers.
Bonuses
Mech Quirk: OmniMech
Fast Refits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
The SR1-O-R can be found with these forces:
- Draconis Combine (Kurita)
- Federated Suns (Davion)
- Free Worlds League (Marik)
- Lyran Commonwealth (Steiner)
- Mercenaries