Strider
SR1-O
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | MEDIUM |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 108 Max Stability: 48 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 40 Alpha: 29 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard Engine (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Heat Sink Kit (SHS) (Fixed) |
E-Cooling | None |
Gyro | OmniMech Gyro (Fixed) |
Structure | Endo-Steel Structure (Fixed) |
Armor | Standard Armor (Fixed) |
Head | S Laser |
Center Torso | Beagle Probe |
Left Torso | CASE (Fixed) Ammo SRM ARTIV |
Right Torso | CASE (Fixed) Ammo SRM ARTIV |
Left Arm | Artemis IV FCS SRM6 |
Right Arm | Artemis IV FCS SRM6 |
Left Leg | Heat Sink (Fixed) |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. The Primary configuration of the Strider is configured to be a short-range striker. The primary weapons are a pair of SRM-6 launchers that are linked to an Artemis IV system. Backing this up is a single Small Laser. The Strider also carries a Beagle Active Probe in this configuration.
Bonuses
Mech Quirk: OmniMech
Fast Refits - Mech variants can be assembled with only 1 part as long as you have sufficient parts from other variants to complete it. BA can mount on OmniMechs
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
![]() |
SR1-O-A
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | MEDIUM |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Omni: 6 |
Speed | 7/10/0 |
Firepower | Max Damage: 16 Max Stability: 0 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 40 Alpha: 5 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard Engine (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Heat Sink Kit (SHS) (Fixed) |
E-Cooling | None |
Gyro | OmniMech Gyro (Fixed) |
Structure | Endo-Steel Structure (Fixed) |
Armor | Standard Armor (Fixed) |
Head | S Laser |
Center Torso | Beagle Probe |
Left Torso | CASE (Fixed) Ammo Narc Beacon Ammo Narc Beacon TAG |
Right Torso | CASE (Fixed) C3 Slave Ammo Narc Haywire Ammo Narc Haywire |
Left Arm | Narc Launcher |
Right Arm | Narc Launcher |
Left Leg | Heat Sink (Fixed) |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. The Strider A carries two Narc missile beacons to designate targets for fire from allied units. Assisting in this mission as well is a TAG laser designator. It mounts a Beagle Active Probe to allow it to find hidden units and a C3 Slave unit to let allied units use the Strider's targeting data. The only true weapon carried on the A configuration is a single Small Laser.
Bonuses
Mech Quirk: OmniMech
Fast Refits - Mech variants can be assembled with only 1 part as long as you have sufficient parts from other variants to complete it. BA can mount on OmniMechs
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
![]() |
SR1-O-B
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | MEDIUM |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 80 Max Stability: 20 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 40 Alpha: 24 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard Engine (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Heat Sink Kit (SHS) (Fixed) |
E-Cooling | None |
Gyro | OmniMech Gyro (Fixed) |
Structure | Endo-Steel Structure (Fixed) |
Armor | Standard Armor (Fixed) |
Left Torso | CASE (Fixed) Ammo LRM |
Right Torso | CASE (Fixed) Ammo LRM |
Left Arm | LRM10 |
Right Arm | LRM10 |
Left Leg | Heat Sink (Fixed) |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. Intended for long range combat and fire support, the Strider B carries a simple payload of two LRM-10 racks with one ton of ammunition for each.
Bonuses
Mech Quirk: OmniMech
Fast Refits - Mech variants can be assembled with only 1 part as long as you have sufficient parts from other variants to complete it. BA can mount on OmniMechs
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
![]() |
SR1-O-C
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | MEDIUM |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 80 Max Stability: 10 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 40 Alpha: 30 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard Engine (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Heat Sink Kit (SHS) (Fixed) |
E-Cooling | None |
Gyro | OmniMech Gyro (Fixed) |
Structure | Endo-Steel Structure (Fixed) |
Armor | Standard Armor (Fixed) |
Head | C3 Slave |
Center Torso | L Laser |
Left Torso | CASE (Fixed) Ammo LRM |
Right Torso | CASE (Fixed) Ammo LRM |
Left Arm | LRM5 |
Right Arm | LRM5 |
Left Leg | Heat Sink (Fixed) |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. Another long range orientated configuration, the Strider C carries a pair LRM-5 launchers as its primary weapons . The Strider C also carries a Large Laser for direct fire at long ranges. Finally, the C configuration is built with a C3 Slave unit to allow allied units to use its targeting data.
Bonuses
Mech Quirk: OmniMech
Fast Refits - Mech variants can be assembled with only 1 part as long as you have sufficient parts from other variants to complete it. BA can mount on OmniMechs
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
![]() |
SR1-O-D
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | MEDIUM |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Omni: 6 |
Speed | 7/10/0 |
Firepower | Max Damage: 102 Max Stability: 16 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 40 Alpha: 41 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard Engine (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Heat Sink Kit (SHS) (Fixed) |
E-Cooling | None |
Gyro | OmniMech Gyro (Fixed) |
Structure | Endo-Steel Structure (Fixed) |
Armor | Standard Armor (Fixed) |
Head | S Laser |
Center Torso | Beagle Probe |
Left Torso | CASE (Fixed) C3 Slave TAG |
Right Torso | CASE (Fixed) Ammo Streak SRM |
Left Arm | M Pulse Streak SRM2 |
Right Arm | M Pulse Streak SRM2 |
Left Leg | Heat Sink (Fixed) |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. Meant for close combat, the Strider D carries a pair of Streak SRM-2 launchers as its primary weaponry. These are backed up by a pair of Medium Pulse Lasers and a single Small Laser. The D configuration also carries a Beagle Active Probe to allow it to find hidden units, a TAG laser designator, and a C3 Slave unit to share targeting data with allied units.
Bonuses
Mech Quirk: OmniMech
Fast Refits - Mech variants can be assembled with only 1 part as long as you have sufficient parts from other variants to complete it. BA can mount on OmniMechs
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
![]() |
SR1-O-E
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | MEDIUM |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Omni: 5 |
Speed | 7/10/0 |
Firepower | Max Damage: 128 Max Stability: 48 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 40 Alpha: 34 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard Engine (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Heat Sink Kit (SHS) (Fixed) |
E-Cooling | None |
Gyro | OmniMech Gyro (Fixed) |
Structure | Endo-Steel Structure (Fixed) |
Armor | Standard Armor (Fixed) |
Head | M Laser |
Left Torso | CASE (Fixed) Ammo Streak SRM |
Right Torso | CASE (Fixed) Ammo Streak SRM |
Left Arm | Streak SRM6 |
Right Arm | Streak SRM6 |
Left Leg | Heat Sink (Fixed) |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. A recent addition to the Strider's alternate configurations, the E carries a pair of highly accurate Streak SRM-6 launchers and a single Medium Laser.
Bonuses
Mech Quirk: OmniMech
Fast Refits - Mech variants can be assembled with only 1 part as long as you have sufficient parts from other variants to complete it. BA can mount on OmniMechs
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
![]() |
SR1-O-F
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | MEDIUM |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Omni: 6 |
Speed | 7/10/7 |
Firepower | Max Damage: 112 Max Stability: 32 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 40 Alpha: 38 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard Engine (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Heat Sink Kit (SHS) (Fixed) |
E-Cooling | None |
Gyro | OmniMech Gyro (Fixed) |
Structure | Endo-Steel Structure (Fixed) |
Armor | Standard Armor (Fixed) |
Left Torso | CASE (Fixed) Jump Jet (S) Jump Jet (S) Jump Jet (S) Streak SRM4 |
Right Torso | CASE (Fixed) Jump Jet (S) Jump Jet (S) Jump Jet (S) Ammo Streak SRM Streak SRM4 |
Left Arm | M Laser |
Right Arm | M Laser |
Left Leg | Heat Sink (Fixed) |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. The F configuration of the Strider is intended for close range combat but unlike the Strider E it is not as dependent on ammunition based weapons. The primary weapons are a pair of Streak SRM-4 launchers backed up by two Medium Lasers. The 'Mech has also had six jump jets added.
Bonuses
Mech Quirk: OmniMech
Fast Refits - Mech variants can be assembled with only 1 part as long as you have sufficient parts from other variants to complete it. BA can mount on OmniMechs
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
![]() |
SR1-O-R
|
|
---|---|
General Data | |
'Mech Type | OmniMech |
Class | MEDIUM |
Weight | 40T |
Stock Role | Omni Striker |
Stock Specifications | |
Hardpoints | Omni: 6 |
Speed | 7/10/0 |
Firepower | Max Damage: 190 Max Stability: 36 Max Heat: 0 |
Durability | Armor: 600 Structure: 336 |
Heat Efficiency | Sinking: 40 Alpha: 64 |
Melee | Kick: 40 Punch: 20 |
Stock Equipment | |
Engine | Standard Engine (Fixed) |
Core | 240 (Fixed) |
Heat Sinks | Heat Sink Kit (SHS) (Fixed) |
E-Cooling | None |
Gyro | OmniMech Gyro (Fixed) |
Structure | Endo-Steel Structure (Fixed) |
Armor | Standard Armor (Fixed) |
Head | M Pulse (C) |
Center Torso | M Pulse (C) |
Left Torso | CASE (Fixed) Ammo Streak SRM |
Right Torso | CASE (Fixed) Ammo Streak SRM |
Left Arm | Streak SRM6 (C) |
Right Arm | Streak SRM6 (C) |
Left Leg | Heat Sink (Fixed) |
Description
The Strider OmniMech is based on the older Cicada BattleMech. The Strider is built on an Endo Steel chassis to help save on weight. Built with a 240 fusion engine, the Strider has a top speed of 97.2 km/h. Outfitted with CASE, built around the durable GM 240, and protected with seven and a half tons of armor, the Strider is a durable 'Mech for its weight class. A field upgrade developed in the midst of Operation Bulldog, this configuration utilized captured Clan Smoke Jaguar weapons to help bolster the SLDF forces in later waves. Based off the Strider E, thanks to lighter Clan weaponry it is able to mount two Clan-tech Streak SRM-6 launchers and a pair of Clan Medium Pulse Lasers.
Bonuses
Mech Quirk: OmniMech
Fast Refits - Mech variants can be assembled with only 1 part as long as you have sufficient parts from other variants to complete it. BA can mount on OmniMechs
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
![]() |